Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Evergreen?
Spring replacement in Evergreen typically runs $180 – $340 for a single torsion spring, including the labor to wind it and rebalance the door. Most doors carry a matched pair, and since both springs wear at the same rate, replacing them together usually lands around twice that range. The written estimate sets the final price, and putting the door back in balance is what actually keeps it running safely.
Key takeaways:
- One spring replaced: $180 – $340 typical.
- A matched pair, replaced together: about double the single-spring range.
- Spring work is rated by cycles, not by years, so a lightly used door’s springs can outlast a heavily used one’s.
- Estimate first, and never wind a torsion spring without the right bars and the door fully de-tensioned. This is the one garage door job that injures homeowners every year.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work breaks down for a typical Evergreen door, with our other common repairs alongside for comparison:
| Job | Typical Estimated Range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Matched spring pair | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Panel replacement | $250 – $500 |
| Garage door repair (general) | $150 – $600 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| New door installation | $700 – $2200 |
What pushes a spring job toward the top of the range? Heavier doors, two-car doors with thicker springs, and doors where a snapped spring has also thrown a cable or bent a track. A single broken spring on a standard one-car door usually sits near the bottom. If the door also needs new rollers while we’re there, that’s the roller line above, not a surprise tacked onto the spring bill. We price the whole job in one written estimate so you see everything before any work starts.
If the problem turns out to be the opener rather than the springs, Ashton Garage Door Repair handles that too, and our Evergreen page covers the full range of what we do locally.
What Affects Spring Replacement Pricing in Evergreen
- One spring or a matched pair. A matched pair is the norm when both springs are original and near the end of their life. Replacing one and leaving the other means a second visit within a short time, so we’ll tell you honestly which makes sense for your door.
- Spring type. Torsion springs (the horizontal ones above the door) and extension springs (the ones that stretch along the tracks) are different animals with different labor time. Torsion work takes more careful winding and usually sits toward the middle or top of the single-spring range.
- Door weight and width. A double-wide door uses larger, heavier springs than a single. Evergreen homes with wide two-car garages see more of the heavier jobs, and heavier means more cost.
- What the broken spring took with it. When a torsion spring snaps, it sometimes releases tension that bends a cable or shifts a track. Those are separate line items, and catching them in the same visit saves you a second trip.
- The brand and age of the door. Doors from Clopay, Amarr, Wayne Dalton, and Raynor take standard springs that are easy to source. Older or unusual doors can need a made-to-order match, which adds a little time and cost.
- Access and clearance. A tight garage with a low ceiling, or a low-headroom door, takes longer to safely brace and work around. That time goes into the estimate.
Can You Fix a Spring Yourself?
No, and we’d gently steer you away from trying. Torsion springs hold a large amount of stored energy even when the door is closed and the spring looks relaxed. Winding bars, the right technique, and a properly braced door are not optional. A slip can break a wrist or worse. The calm, sane choice is to call a trained technician and let the spring be the only thing that moves. Same goes for extension springs, which can whip toward a person if a safety cable isn’t in place. That’s a job for a pro.
How Long Do Garage Door Springs Last?
Springs are rated by cycles, not years. A cycle is one full open-and-close. A standard spring is often rated around 10,000 cycles, and heavy-duty springs go higher; how much you use the door determines how fast you reach that number. A family that opens and closes the door a few times a day reaches the end of the spring’s life sooner than a household that mostly uses the front door. When one spring breaks, the other is almost always close behind, which is the strongest reason to replace them as a pair. If your opener is also straining or the door sounds labored, our garage door opener repair service keeps the whole system in step.
How Long Does a Spring Replacement Take?
Most single-door spring replacements are done in under two hours once we’re on site. A matched pair on a heavy door can take a bit longer. We arrive with the springs and the right winding bars, rebalance the door, and test the opener’s travel and force settings before we leave. You’re not waiting around all day for a five-minute swap; the time is mostly in doing it safely and checking that the door runs smooth and even afterward.
How to Save on Spring Replacement
The biggest saving is timing. Replacing a matched pair in one visit costs less than two separate single-spring visits. When we’re already there for a spring, having us check the cables and rollers saves a second call-out. If the opener is on its last legs, bundling opener service with the spring job spreads the labor across one visit. And an early estimate is free: call (833) 400-0995. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A written estimate, given upfront, means you know the number before we touch anything.
Repair or Replace?
If the door itself is solid, panels are straight, and the tracks are true, replacing the springs is almost always the right call. If the door is old, rusted, and struggling, a new door can cost less over time than a string of repairs. Our garage door repair team can tell you which makes sense for your door, and our garage door installation service handles the full replacement if that’s the answer. Repair or replace, we’ll tell you which one actually makes sense without pushing either.
Which Brands Do We Work On?
We’re trained on the doors and openers homeowners actually have, so you rarely hear “we don’t work on that.” That means Clopay, Amarr, Wayne Dalton, and Raynor doors, plus LiftMaster, Chamberlain, Genie, and Craftsman openers. A Raynor door with a Craftsman opener, or a mixed-brand setup assembled over the years, gets serviced by one technician in one visit. From the spring to the smart opener, one call covers the whole door.
Do You Need a Permit for Spring Replacement?
Spring replacement is a repair, not a structural change or new installation, so it generally doesn’t trigger a permit on its own. That said, rules vary by city, and if your project involves a new door or significant structural work, check with your city’s building department first. We’re happy to talk through what’s typical for a repair job in Evergreen before we start.
Why Evergreen Springs Wear
Evergreen’s mild winters mean the door seals aren’t fighting snow and ice, but the dry stretches and warm summers still put the door through plenty of cycles. The more a household is in and out of the garage, the faster the springs reach their cycle limit. Keeping the door balanced and the tracks clean slows the wear. If the door starts sounding rough or the opener works harder than it used to, that’s a good time to have us look before a spring lets go.
FAQs – Spring Replacement Cost
How much does a garage door spring cost in Evergreen?
A single spring replacement typically costs $180 – $340 in Evergreen, including labor and rebalancing. A matched pair usually runs about twice that range because both springs are replaced together. Call (833) 400-0995 for a free estimate on your specific door.
Is it cheaper to repair or replace a garage door?
Spring repair at $180 – $340 is almost always cheaper than a new door at $700 – $2200, so repair wins when the door itself is sound. Replacement makes more sense when the panels, tracks, and frame are all past their life. We’ll give you an honest read before you decide.
Can you come today?
Often yes. We keep common springs on hand and dispatch crews Sunday through Friday. Call (833) 400-0995. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A broken spring leaves the door stuck, so we treat it as a priority.
Why does a spring replacement cost more for a pair?
Because you’re replacing two springs instead of one, roughly double the single-spring range. Springs wear at the same rate, so replacing both at once avoids a second visit when the other spring breaks soon after. The written estimate always spells out exactly what’s being replaced.
Do you work on my door brand?
Nearly always. We service Clopay, Amarr, Wayne Dalton, and Raynor doors and LiftMaster, Chamberlain, Genie, and Craftsman openers, which covers virtually every system a homeowner has. If you’re unsure, call (833) 400-0995 and we’ll confirm before we book.
Ashton Garage Door Repair is a garage door specialist, not a general handyman, and we’ve been at it since 2013. Every tool and every training dollar goes toward one trade, so the technician who shows up knows springs, cables, tracks, and openers cold. From a single broken spring to a full new door and opener install, one call covers the whole door. If you’re weighing repair against replacement, or just want a straight number on a spring, call (833) 400-0995 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Evergreen market as of 2026. Ashton Garage Door Repair offers free estimates – call (833) 400-0995.
What Our Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Alejandro Guzman"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Maria Delgado"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
- Nicole Whitaker