Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Evergreen?
New garage door installation in Evergreen typically costs $700 to $2,200, depending on the door size, material, insulation, and whether a new opener is part of the job. That range covers a standard single-car door through a larger double door, with a written estimate setting the final price before any work begins. An opener added at the same time usually runs another $250 to $550 installed.
Most Evergreen homeowners land somewhere in the middle of that range: a properly insulated double door, a LiftMaster or Chamberlain opener, and a clean removal of the old door. We’ve been installing garage doors here since 2013, and we’ll tell you plainly which doors hold up and which ones trade a lower sticker price for years of small problems.
Key Takeaways
- Typical installed cost for a new garage door in Evergreen: $700 – $2,200.
- A new opener adds $250 – $550 when bundled with the door install.
- Insulated doors and custom sizing push cost up; standard single doors sit near the bottom of the range.
- Most installs are planned jobs, not same-day emergency repairs, and the estimate is free.
- One company handles the door and the opener, so you don’t need two contractors.
Garage Door Installation Cost Breakdown (2026)
Here’s what the line items look like in the Evergreen market. These are typical estimated ranges, and the specific door you choose determines where you fall.
| Item | Typical Estimated Range |
|---|---|
| New door installation (single door) | $700 – $1,200 |
| New door installation (double door) | $1,200 – $2,200 |
| Opener installation (added to the job) | $250 – $550 |
| Panel replacement (single section) | $250 – $500 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Opener repair (existing opener) | $120 – $320 |
| General garage door repair | $150 – $600 |
The single biggest driver is the door itself. A basic uninsulated steel door in a standard size is a fraction of the cost of an insulated carriage-style door with windows and decorative hardware. The opener matters too: a chain-drive Craftsman and a belt-drive LiftMaster with Wi-Fi and battery backup are very different purchases, even though both get installed in a couple of hours. Labor is fairly consistent across Evergreen; the door you pick is what moves the number.
One thing we see often: homeowners budget for the door and forget the opener, then discover the old opener can’t handle the heavier door. If your existing opener is aging or undersized, plan for it now rather than paying for two separate visits. When we quote a new door, we check the opener against it so you get one written estimate that covers the whole system.
What Affects Garage Door Installation Pricing in Evergreen
Evergreen homes range from newer builds with standard two-car garages to older properties with openings that were built to fit whatever door the original owner could find. That variety affects price more than the calendar does. Here’s what actually moves the number:
- Door size. A single-car door costs less than a double. An oversized opening, or one that doesn’t match a standard size, means either a custom door or careful modifications to the framing and track, and that adds cost on both ends.
- Material and insulation. Steel is the most affordable and the most common in Evergreen. Wood and composite doors cost more, and insulated doors cost more than uninsulated ones because the panels are thicker and heavier. If your garage sits under a living space or faces the sun most of the afternoon, an insulated door is worth pricing out.
- Opener type and integration. A basic opener is straightforward. A smart opener with Wi-Fi, battery backup, and myQ or similar app control adds cost but is genuinely useful if you want to check whether the door is closed from your phone.
- Old door removal and disposal. Taking out a worn door and hauling it away is part of a professional install. It’s usually included, but it’s worth confirming in the written estimate so nothing surprises you.
- Track and framing condition. If the existing tracks are bent or the framing has shifted, the install includes correcting those first. We check this before quoting so the estimate reflects the real job.
- Windows, hardware, and style details. Carriage-house panels, decorative handles, and window inserts add to the price. They’re cosmetic, but they’re real line items.
One local note worth knowing: garages in Evergreen tend to get a lot of sun and heat through the afternoon. That’s a reason to lean toward a properly insulated door if the garage shares a wall with the house. It’s not a dramatic difference, but over years it shows up in how comfortable the rooms beside the garage stay.
Is It Cheaper to Repair or Replace My Garage Door?
Repair is usually cheaper if the door structure is sound and the problem is mechanical. If a spring breaks, a cable frays, a panel dents, or a track bends, you’re looking at $110 – $340 for most single-component repairs. Replacement makes more sense when the door itself is failing: cracked or rotting panels, a bent frame, or a door that’s been repaired repeatedly and is still unreliable.
As a rough rule, if the cost of repairs climbs past about half the price of a new door, replacement deserves serious thought. We’ll tell you which one actually makes sense rather than steering you toward the bigger invoice. For a repair-focused look at the same trade, see our Ashton Garage Door Repair page, which covers the full range of what we fix.
It also helps to know when a repair can wait and when it can’t. A noisy roller or a worn weather seal can sit for a while. A broken spring or a cable that’s come off its drum should not be operated, because the door can drop. If you’re not sure which category you’re in, call and describe what’s happening; we’ll tell you whether it’s safe to use the door in the meantime.
How to Save on Garage Door Installation in Evergreen
The biggest savings come from planning before you buy, not from chasing a discount after the fact. A few practical moves:
- Bundle the door and opener. Installing both in one visit usually costs less than two separate jobs, and it avoids the mismatch problem of a new heavy door on an old undersized opener.
- Choose a standard size. Standard-size doors are priced lower than custom builds. If your opening is odd, ask whether the framing can be adjusted to fit a standard door instead of ordering custom.
- Skip cosmetic upgrades if budget is tight. Windows and decorative hardware can be added later. The structural parts of the job, like the door, springs, tracks, and opener, are what you don’t want to compromise on.
- Fix small issues before they grow. Replacing a worn roller at $110 – $220 is cheaper than letting it wear the track and turn into a realignment job.
- Get a free written estimate. We’ll tell you what the job actually needs and what it doesn’t. Call (833) 400-0995 to schedule one.
One thing we’d steer you away from: buying a door online and hiring someone to install it separately. It looks like a saving, but if the door arrives damaged or the wrong size, you’re stuck between the seller and the installer with no one taking responsibility. When we supply and install, one company answers for the whole result.
Should I Insulate My New Garage Door in Evergreen?
Yes, if your garage shares a wall with living space or you use the garage as a workshop. An insulated door runs higher than an uninsulated one, but it keeps the garage noticeably cooler during Evergreen’s hot afternoons and quieter when the door is operating.
If the garage is a detached structure used only for parking and storage, an uninsulated steel door is a perfectly reasonable choice and keeps the project near the lower end of the range. We’ll walk you through both options with real numbers so you can weigh the trade-off yourself.
Insulation also affects the opener choice. Heavier insulated doors need a properly rated opener; an underpowered one will strain and wear out early. That’s one more reason the door and opener should be planned together. We work with LiftMaster, Chamberlain, Genie, and Craftsman openers, so whatever level you choose, we can match it correctly.
What About Springs, Cables, and the Rest of the System?
A new door is only as good as the parts around it, and the parts around it are where a lot of the ongoing expense lives. The springs carry the door’s weight; the cables keep it on track; the rollers and hinges keep it quiet. When one of those is worn, the door strains the opener and the whole system suffers.
When we install a new door, we check the springs, cables, rollers, and tracks. If anything is near the end of its life, we note it in the estimate so you’re not surprised six months later. If your current door is fine and you just need the mechanical side looked after, our garage door repair service covers springs, cables, tracks, rollers, and panels, all under one company. Spring repair alone runs $180 – $340 for one spring, and a matched pair is usually replaced together at about twice that.
How Long Does a New Garage Door Take to Install?
A standard door install usually takes about half a day. A double door with a new opener, track corrections, and old door removal can stretch to most of a day. Custom doors can add waiting time before the install because the door has to be ordered.
If your current door has failed and you need it working as soon as possible, call and we’ll tell you what’s realistic. We answer 24/7, and we dispatch technicians from 7am to 7pm, Sunday through Friday. If you call outside those hours, we’ll book you into the next opening. For a door that’s broken and unsafe to operate, a repair in the meantime may be the better move than waiting on a new door.
Why Choose a Garage Door Specialist in Evergreen?
A specialist works on one thing all day. Every part in the truck is a garage door part, every training hour goes toward doors and openers, and every job is on a door like yours. We’ve been serving Evergreen since 2013, and we handle repair, opener repair, and installation under one roof.
We work on all eight of the major garage door and opener brands in North America: doors from Clopay, Amarr, Wayne Dalton, and Raynor, and openers from LiftMaster, Chamberlain, Genie, and Craftsman. That matters most when your system is mixed. A Raynor door with a Craftsman opener is no problem for us: one technician, one visit, one estimate. You can read more about our Evergreen service area on our Evergreen page.
We’re not a general handyman company, and we don’t pretend to be. That focus means we don’t show up having to figure out your door on the spot. We’ve already seen the brand, the opener, and the failure mode dozens of times.
What’s Included in a Written Installation Estimate?
A good estimate is specific. It should name the door, the size, the material, the opener if one is included, and whether old door removal is covered. It should also note anything that needs correcting in the tracks or framing, and it should state a price that doesn’t move unless the job changes.
When you call us, the estimate is free. We’ll look at the door and the opener together, tell you what needs replacing and what can wait, and give you a written price before any work is scheduled. The written estimate sets the final price. If we find something unexpected, we’ll talk about it before we do anything, not after.
Do I Need a Permit for a New Garage Door in Evergreen?
Most cities require a permit for a structural change to a garage door opening, but not for a straight replacement of the same size and style. Rules vary, so ask Evergreen’s building department directly before you schedule. We can tell you what the job involves; they tell you what paperwork it requires.
For most owners doing a like-for-like replacement, the job is straightforward. Where it gets complicated is when the opening size changes or the framing has to move. In those cases, the permit question is worth sorting out before the door is ordered, because it can affect the timeline.
FAQs – Garage Door Installation Cost
How much does a new garage door cost in Evergreen?
A new garage door in Evergreen typically costs $700 – $2,200 installed. Single doors sit near the bottom of that range; double doors and insulated styles sit higher. The written estimate sets the final price. Call (833) 400-0995 for a free estimate.
How much does it cost to add a new opener with the door?
Adding an opener to a new door install typically runs $250 – $550. A basic chain drive is on the lower end; a smart belt-drive LiftMaster or Chamberlain with Wi-Fi is on the higher end. Bundling it with the door install is usually cheaper than a separate visit.
Is it cheaper to repair my garage door or replace it?
Repair is usually cheaper: most single-component repairs run $110 – $340 for things like springs, cables, and rollers. Replacement makes more sense when the door itself is failing, with cracked panels or a bent frame. We’ll tell you which path fits your door. Call (833) 400-0995 and we’ll walk you through it.
Can you come out today to look at my door?
Same-day service is often possible for repairs and estimates. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside those hours, we’ll book you into the next opening. Call (833) 400-0995 to check what’s available for your address.
Which brands do you install?
We install doors from Clopay, Amarr, Wayne Dalton, and Raynor, and openers from LiftMaster, Chamberlain, Genie, and Craftsman. That covers most of the systems already in Evergreen garages, and it means we can match a new door to the opener you already have.
Get a Free Garage Door Installation Estimate in Evergreen
Every garage door job here is different, and the number that matters is the one written on your estimate. We’ll come out, look at the door and the opener together, and give you a price you can plan around. Call (833) 400-0995. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether you’re replacing a worn door or upgrading an opener alongside a new one, one call covers the whole door.
Pricing reflects the Evergreen market as of 2026. Ashton Garage Door Repair offers free estimates. Call (833) 400-0995.
Written by the team at Ashton Garage Door Repair, serving Evergreen since 2013.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Jessica Wong"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Rohan Shah"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Javier Garcia